Leatt 3DF 6.0 Knee Guards

At the dawn of the twenty-first century, driven by the unforeseen death of a fellow rider, a Bachelor of Medicine and Bachelor of Surgery set out to design a revolutionary neck brace. After several years of research and design, Dr. Chris Leatt (MB ChB) finally had his first neck brace in production, and it wasn't long until the Leatt-Brace earned the product of the year award from one of the largest moto news and media outlets. Ever since that day, Dr. Leatt and his hand-picked R&D team have been pushing boundaries and setting new standards, not only when it comes to neck braces but in all aspects of protection for high speed and high impact sports. Most recently, Leatt has revamped a significant portion of their mountain bike line-up. From apparel to protective guards, from hydration bags to patented helmet liners, there’s a lot going on in this company that started with a single product. We were able to get our hands on some of the new gear including the 3DF 6.0 knee guard and with several months of wear and tear behind us now, here are our impressions.

Leatt 3DF 6.0 Knee Protector Highlights

• Total Leatt® protection score of 20 points
• Soft knee guard with co-molded hard shell sliders 
• Three types of protection: Standard foam protects peripheral leg, Center 3DF pad over knee is malleable but hardens during impact, Outermost co-molded hard shell allows for sliding over rocks and roots
• 3DF AirFit ventilated soft impact foam 
• CE tested and certified as impact protection: Knee EN1621-1 
• New anti-slip calf band and silicone grip lining 
• Silicone printed and adjustable non-slip leg straps 
• New anti-odor MoistureCool and AirMesh wicking fabrics 
• Pre-curved 3D design for optimal fit 
• Side impact protection 
• Weight: 509 grams (Size L/XL, verified)
• Sizes: S/M, L/XL, XXL
• MSRP: $89.95 USD

Initial Impressions 

Pulling the 3DF 6.0 knee guard out of their packaging, the first thing I noticed was the overall quality of materials used and of the stitching holding it together. Everything was constructed with care and the craftsmanship shows. The main material used for these guards is perforated silicone lined with cloth. This material allows for good breathability without sacrificing too much protection. The back of the pad is made from a thin and highly breathable moisture wicking fabric which allows for the legs to keep cool while climbing.

The stitching holding each piece together appears to be stout enough to withstand medium to heavy impacts without stressing the integrity of the pad too much. The 3DF 6.0 knee guard also features three elastic bands: up top, in the middle (just below the joint), and at the bottom. The top is by far the burliest strap and comes with a Velcro strap on the outside and a silicone printed, non-slip strip on the inside. Placing these guards on the scale, I was surprised to see them barely break the 500 gram mark as their appearance and the amount of protection they offer would suggest being slightly heavier.

Comparing it to other enduro/DH knee pads however, the 3DF 6.0 still seems to generate less heat than most.

When it comes to heat management, these were certainly not made for XC. They offer much more protection but as a result can be a bit toastier too. During steep and elongated climbs I noticed my knees starting to get warm, particularly in the area directly behind the center kneecap protector. Comparing it to other enduro/DH knee pads however, the 3DF 6.0 still seems to generate less heat than most. On flat ground or when headed downhill they quickly cooled down, especially thanks to the vented material found around the back of the guard. All and all, I was very impressed with how cool they felt during gravity-fed enduro and DH rides.

Back in the day of open-bath suspension and rigid seatposts, one of the more difficult things to achieve when finding the right knee guard was having it stay in place during an over-the-bars moment. More often than not knee pads would shift or become completely dislodged during a high speed impact. Not even the burliest looking pads like the 661 4x4 were fail-proof. But, thanks to modern technology and general advances in design, knee pads have gotten much better. When I initially pulled the 3DF 6.0 knee guards out of their packaging and threw them on, I felt there may have been a chance of them being dislodged during a crash. After several rides however, they began to really form to my knee. Mixing in a little pedal sweat into the equation and they are definitely among the better performers in this regard, particular when the leg is bent (which it does tend to be for most crashing). 

Things That Could Be Improved

Although the sizing worked out very well for me, shrinking the parameters for the sizing chart and offering 4 sizes to choose from would be an excellent route to go to ensure a proper and snug fit for all riders. Other testers have reported a slightly more "floaty" fit which can also affect performance during a crash.  

When riding in colder temperatures (35 °F and below) I did notice the center pad begin to lose a bit of mobility. Keep in mind similar ‘hardening upon impact’ material can be found in the majority of knee guards in this class today and these all share the same characteristics in the cold. After wearing the 3DF 6.0 knee guard for a while they do warm up and conform but if you’re planning on shredding hard right out of the gate on a cold morning, I’d recommend wearing them during the drive to the trails or putting them up next to your car’s heater before getting too sendy.

The center 3DF pad is vented for flexibility and arguably ventilation but the hard plastic covering these vents is not. This certainly limits how well the pad can breathe directly over the knee. Perforating the hard plastic would certainly increase the breathability of the pad over the knee but could limit the protection it offers. Would it be worth venting the hard outer shell for version 2.0? On balance, I would argue yes. 

Although I would give “The Trifecta” all my trust in protecting me during a crash, there some deadzones or the areas that lack protection on the 3DF 6.0 knee guards. The knee cap and front of the shin are very well protected and so are the perimeters of the knee but transitioning between the top and bottom perimeter pads there are a couple of very small gaps. Are these deadzones a deal-breaker? Certainly no as I would most certainly trust these pads during a crash. But given the depth of this review, it’s worth mentioning and to be aware of. 

Long Term Durability

Although I’ve been wearing the 3DF 6.0 knee guard for only a few months, I haven’t seen any issues with the quality or craftsmanship. There are surface scratches on the hard plates but no rips or tears on the fabric itself. Although I haven’t had any high speed or high intensity crashes with the knee pads (yet), I have quite a bit of confidence that they will offer all the protection I need and would be surprised if they didn’t hold up during the process. If for some reason you do experience an issue with a defective guard, Leatt does offer a 1 year limited warranty which would cover that. On that topic, although I didn't have any issues with the guards, I did reach out to Leatt to gather a bit of information so I could heave it all in this review. Getting in contact with them was very easy to do and they were very friendly, informed, and accommodating which is exactly what you would hope for if you ever were to have an issue. Leatt is a company I feel I could buy confidently from.

What's The Bottom Line?

Congratulations if you have made it this far in the review. You’re a real trooper. The 3DF 6.0 knee guard is relatively new member to the Leatt family. Its novel construction and features are among the top of its class while offering great breathability and protection. It is comfortable enough to wear the entire ride and even on the drive back home, and although it can get a bit warm directly under the kneecap, it still keeps cool in all but the worse conditions. There are a few very small deadzones which lack protection and if you believe in Murphy’s Law, something to consider but this certainly isn’t a deal-breaker. You should also note that they run big for their size and that the roomy design may not provide the best fit for all shapes of legs - try before you buy is sound advice here. After a few months on the trail, these guards have held up very well and they are covered by a 1 year warranty if anything untoward should pop up down the line. Although there is some room for future improvement, Leatt did a great job on their 3DF 6.0 knee guard, and it's well worth considering if you are after a burlier guard that can still accompany you for a long day out in the saddle.

More information at: www.leatt.com.

About The Reviewer 

Lance Starling - Age: 30 // Years Riding MTB: 17 // Height: 6'3" (1.91m) // Weight: 190-pounds (86.2kg)

Lance got his first mountain bike in 2001. Fast-forward 17 years and not a day has gone by that he hasn’t completely obsessed over the sport. This obsession has transformed him into a mountain bike guru whose love for picking apart components and gear is similar to a honey badger consuming king cobras. Nothing is left untouched. His playful riding style generally keeps him more in the air than on the ground and whatever tricks he lacks he makes up for with a good ol’ bar hump. Never at any time have consumers have had it so good and with over 10 years in the industry as a certified mechanic and gear expert, Lance is devoted to helping those riders find the perfect gear to meet their needs.